If you’re a music lover, an onboard music system is mandatory. There’s a mysterious connection between the open waters and music. Whether it’s classical, jazz, rock, country, folk, or reggae, there’s a song for every mood when you’re sailing.
A marine music system lets you take your favorite music with you on the waters. We have them in our homes, in our cars, even in our phones, so we need them on our sailboats. A quality system isn’t difficult to install and it doesn’t have to be expensive.
Before I continue, a bit of legal housekeeping. This post contains affiliate links. That means I receive a small commission if you make a purchase using those links. Those commissions help to pay the costs associated with running this site so that it stays free for everyone to enjoy. For a complete explanation of why I’m telling you this and how you can support this blog without paying more, please read my full disclosure.
There are a few special considerations you should take when choosing a marine music system:
- Quality sound reproduction – obviously, a decent sounding system should be a priority. On the other hand, you shouldn’t expect an audiophile quality listening experience with the wind and the waves mixed in. Personally, I’d rather listen to the water, the wind, or silence than poor quality music.
- Durability in the marine environment – components should be moisture resistant, well protected from impacts by other objects, and shock and vibration resistant.
- Multiple input sources – if you have a compact disc collection, you might want to play some of those. However, the mechanisms of most compact disc players aren’t well suited to the marine environment. If you play a lot of music on your smart phone, you’ll want Bluetooth capability or a line input jack. Memory sticks and cards are durable and can hold massive amounts of music and take very little space. The ability to play local radio stations can be helpful if you venture afar. And the ability to tune in to updated weather reports by the National Weather Service shouldn’t be overlooked.
- Low power consumption – remember your sailboat’s electrical power budget. A high power amplifier and motorized CD player can drain your battery bank.
- Compact size – space is a precious commodity aboard any sailboat but especially trailerable sailboats.
- Easy installation – there are only so many places on a sailboat to install the components and cutting large holes to install them is neither favorable nor always an option.
Sails and songs go together
The components that I installed on Summer Dance are a good example of an inexpensive system that was easy to install and also sounds good. I purchased all the components new for less than $150:
- Pyle PLMR19W “mech-less” 45Wx4 channel receiver/digital audio player with weather band and wireless remote control. For more options, go here.
- Pyle PLMRNT1 marine wire antenna to pick up weak stations. For more options, go here.
- Pyle PLMR24 3-way 3.5″ box speakers. For more options, go here.
- Pyramid MDC-7 2-way 6.5″ speakers.
- Water resistant gimbal mount enclosure.
- Cadence 14 gauge white marine audio speaker wire. For more options, go here.
The receiver/media player is very capable but not remarkable. It receives AM, FM, and weather channels. With the marine antenna connected, it’s pretty sensitive at picking up weak signals. It plays MP3 and WMA files on SD cards or USB memory sticks and has an auxiliary input for external devices like a smart phone or iPod.
It’s also very small and lightweight, which works well with the gimbal-mounted enclosure. All of the wire connections fit inside the enclosure with space to spare. I routed the wires outside the enclosure in the starboard deck joint trim and under the hull liner to each speaker.
The remote control is convenient both inside the cabin and from the cockpit. I placed a small piece of self adhesive Velcro tape on the back of the remote so that it can be stuck to the cockpit bulkhead when not in use.
When choosing a mounting enclosure, look for ventilation holes. Some enclosures are only rated for less than 50 watts and could cause the receiver to overheat. It doesn’t need to be waterproof but mount it high enough that water getting into the enclosure isn’t likely to happen.
Speakers of the (pilot) house
For speaker installation, you basically have two choices: recessed speakers that require cutting holes or box speakers that take up more space. The system on Summer Dance uses both with concessions for each type.
I was concerned that the 3-1/2″ box speakers that I purchased would sound tinny. Instead, I was impressed with their range. They have better bass response than the 6-1/2″ Pyramids and crisp highs. The ported boxes are quite effective. I mounted them to the upper corners of the forward bulkheads where they’re out of the way.
I wanted good sound in the cockpit as well as in the cabin, so I mounted the waterproof Pyramid 6-1/2″ coaxial speakers in a spare bottom hatch board to make them portable. A cup holder shelf below the speakers holds refreshments on the companionway step. There’s little stereo separation, obviously, but they work well enough.
The cockpit speaker cables plug into a plate that I fabricated with RCA jacks and mounted in the cabin near the companionway step. This design allows the speakers to:
- Face outward from the companionway or sit on the port cockpit seat during the day
- Face inward from the companionway at night
- Be easily disconnected and stowed when not needed
I’m very satisfied with the system considering its cost. The sound isn’t concert quality but I use it a lot. If I had to do it over again, I would probably only choose better cockpit speakers.
Would you like to be notified when I publish more posts like this? Enter your email address below to subscribe to this blog and receive notifications of new posts by email. You will also receive occasional newsletters with exclusive info and deals only for subscribers and the password to the Downloads page. It’s free and you can unsubscribe at any time but almost nobody does!