Make a Door to Storage Space Under the V Berth
Storage for gear, clothing, provisions, and sails is a universal problem with trailerable sailboats. I began solving my onboard storage dilemma with an under galley storage solution. This project is a repeat of that one but claims the unused space under the V berth in my Catalina 22, specifically on the starboard side next to the portable toilet.
It’s also different from that project in that I used different wood for this project. The first door that I made was out of stained Philippine mahogany. I made this one from Honduran mahogany with an oil and polyurethane finish instead of stain. The result is almost indistinguishable from teak, as you can see below.
Continue reading “Make a Door to Storage Space Under the V Berth”
What to Expect From a Professional Bottom Paint Job
When Summer Dance got beat up in a freak storm back in 2014, the damage was mainly in two areas. The worst damage was the deck rim and the rub rail, for which I described the repairs in Storm damage repairs. The collateral damage was the bottom paint, which also got hammered as you can see in the following picture. In some areas, the top layer of paint was knocked off and exposed an underlying layer of paint. In other areas, it was knocked off completely down to the fiberglass. It all needed fixed, so it was included in the insurance claim that I submitted. Our insurance company promptly paid the claim so that meant that I wouldn’t have to do all the work!
Continue reading “What to Expect From a Professional Bottom Paint Job”
How to Completely Rewire Your Sailboat
It’s an enduring truth that appearances can be deceiving, especially with electrical systems. When I inspected Summer Dance before buying her, the electrical system looked like one of the boat’s strong suits. It had an upgraded panel and a new battery. The wiring was all original except for spliced connections to the panel. There weren’t any added accessories so the system was simple and I expected it to be relatively problem-free. Granted, I’m no marine surveyor and if I had ordered a survey, it would have caught many of the problems that I later discovered.
Single Line Jiffy Reefing Made Easy
Your ability to reef your mainsail is one of the most important sailing skills that you can learn. Your reefing rigging plays an important part in that. You can do it with just a few short lengths of rope but it will be more time consuming and difficult than it needs to be. That method is not very safe to use during the weather conditions when you’re most likely to need to reef. Having a system of reefing lines in place and ready to use at any time increases your ability to reef smoothly and efficiently (in a jiffy) when conditions warrant it, particularly if you sail single-handed.
Continue reading “Single Line Jiffy Reefing Made Easy”
Beware of Galvanic Corrosion!
Galvanic corrosion can happen when dissimilar metals, stainless steel and aluminum, for example, are in contact with each other, exposed to an electrolyte, and an electrical current is applied. That’s the technical definition. The layman’s definition is it’s the white stuff that grows around your stainless steel fasteners in your aluminum mast and boom when you are around salt water.
Continue reading “Beware of Galvanic Corrosion!”
Even the Winds And the Waves Obey Him
The following is one of my favorite devotions from one of my favorite preachers, Charles Spurgeon (1834 – 1892). It’s a commentary on the famous story of when Jesus calmed the storm in Mark 4:36-41. As you celebrate Christmas this … Continue reading Even the Winds And the Waves Obey Him
How to Clean Sails at Home
Just like a white shirt is a magnet for spaghetti stains, your sails are magnets for stains, dirt, and mildew. Unlike a white shirt, you shouldn’t bleach or machine wash your sails, it will ruin them. That means don’t clean them in a chlorinated pool, either.
For hundreds of dollars, you can send your sails to a professional cleaning service like SailCare.com. They’ll come back looking great but if they also need ANY repairs (loose stitches, etc.), you’ll be put on the spot to have them repaired and your cost can quickly mount. And if your sails are old, they’ll still be old when they come back. Their cleaning process includes re-impregnating the fabric with resins but that just stabilizes the current shape of the sails for a while, it doesn’t restore them to a like-new shape. But if you’re going to have your sails repaired anyway, this can be a good option to clean them at the same time.
Continue reading “How to Clean Sails at Home”
Restore Your Exterior Teak to Better Than New
Is your topside brightwork weathered, worn, and sorely in need of refinishing? If so, this is one project that you’ve probably been putting off but you know it needs to be done. The job isn’t particularly difficult or expensive, it just takes plenty of time to do it right and to get good results. But after it’s done, it can be relatively maintenance free for years to come while looking stunning.
Continue reading “Restore Your Exterior Teak to Better Than New”
Fix That Screeching Main Hatch!
A very common problem with older C-22s is a companionway hatch that screeches when opened or closed. Over the years, the flanges on the sides of the hatch and the teak rails that they slide in wear thin from use.
This eventually lowers the hatch until it scrapes against the cabin roof. The sound it makes is like fingernails on a blackboard, only louder. It’s not something that you want to put up with for long.
Continue reading “Fix That Screeching Main Hatch!”
The $tingy Sailor 